undercarriage parts

Advantages of ITM Undercarriage Parts For Excavator And Bulldozer • Quality guarantee • Technical support • Gather different parts into one container • Unobstructed communion • Delivery Merchandise in time • LCL is acceptable • OEM parts number guidance • Producing according to drawings.

YMMA Excavator Undercarriage Parts YM55 TOP Roller Quality of our products are high at reasonable prices, certified by ISO9001:2008, specifically designed, engineered and manufactured under consistent quality control. We also make according to OEM requirements. What’s more, we can produce new products according to customers’ supplied samples, designs or technical drawings.

JCB Excavator Undercarriage Parts Parts Track Roller JCB Track Roller adopts forged shaft, imported oil seal, and the national standard 45# or 40CR steel is used as raw material, after overall quenching and tempering and intermediate frequency heat treatment. the surface hardness can reach HRC54-59,and the hardened layer can reach 2-3MM,(HRC45)above, after rough surface grinding and fine grinding, the surface roughness RA0.4 or less. The high-standard production and processing load-bearing shaft has excellent mechanical properties against wear, high load and high rigidity, which greatly prolongs the service life of the assembly.

Single Bottom Roller For Takeuchi Excavator Undercarriage Parts Single Bottom Roller is adopting through hardening system and spraying quenching system while complying with the stringent ISO System. We are able to assure the part has excellent wear resistance even in the most severe working conditions.

Mitsubishi Undercarriage Top Roller For MS180 Excavator Main Features 1) Good metal fibrous tissue and special heat treatment brings them longer life. 2) Resist abrasion and impact well; Prevent fragmentation well. 3) Using low and high-double seal makes it life lubrication 4) High flexibility.

Undercarriage Parts For ATLAS Crawlerdrill Main Features 1. Sta1. Standard product design 2. High quality material selection 3. Advanced imported manufacture & testing equipment 4. Advanced manifacturing process and production technology 5. in the line with global standards 6. By long time testing, proved to be good conditionndard product design"

Carrige Roller Assembly For Volvo UC Components Excavator EC340 • Bottom roller are forged, quenched and tempered. • Rail deep hardened, with average surface hardness HRC 53. • Track bushings treated in a special furnace for high temperature carburizing. • Deep hardened pins for best resistance to wear and fatigue. • Track shoes heat treated for proper toughness and wear resistance.

Bottom Roller For Doosan DX220 Excavator Undercarriage Parts • Bottom roller are forged, quenched and tempered. • Rail deep hardened, with average surface hardness HRC 53. • Track bushings treated in a special furnace for high temperature carburizing. • Deep hardened pins for best resistance to wear and fatigue. • Track shoes heat treated for proper toughness and wear resistance.

Kobelco Excavator Undercarriage Components SK330 Track Roller Advantages: • Quality guarantee • Technical support • Gather different parts into one container • Unobstructed communion • Delivery Merchandise in time • LCL is acceptable • OEM parts number guidance • Producing according to drawings.